How do I measure for a replacement screen door?

First, decide on the type of screen door you want. Some homeowners opt for a sliding door, while others prefer a French door. You’ll need the door’s overall width, height, and depth, along with the screen size and if it’s fixed or slidable. If you have a door with glass panels, make sure to add extra space to the overall door size.

How to size a replacement screen door?

Your existing screen door may be the right size for your home, but it might not be fitting properly. Replacing it makes sense if it’s been damaged, but if it’s just getting old and doesn’t fit snugly, it’s time to replace it with a new one. If you have an existing door, measure it and write down the measurements. Your goal is to make sure the new door is at least 1/2-in. longer and

How to measure for a replacement screen door?

A screen door is typically approximately 1.5 times the width of your regular door. The height will depend on the type of screen door you have, as well as the manufacturer’s recommendations. We recommend adding an additional 1-2 inches for expansion and nailing.

How to fit a screen door?

When you measure a new door, make sure you lay it on the floor with the door open so you can see the gap between the door frame and the edge of the door. Measure the width of the gap to make sure your new door will fit properly. Using the actual door frame as a guide, mark the location of the door on the wall. Install your new door against the wall and mark the location of the door on the wall again. Add the door jamb extension and mark the wall

How to fit a replacement screen door?

Sometimes, the existing screen door is a little too small. If you have a large door and the existing screen door is a little snug, then it’s time to replace it. You can measure the width and height of the door and use that to guide the size of a new screen door. You can get a pre-cut screen door from a home improvement store, or you can have one made to fit your door by a professional.