How to back flush a Hayward pool filter?
If it’s been a while since you’ve performed a back flush on your Hayward pool filter, you may not be seeing the results you’re expecting. If you’ve gone a few months without performing a back flush, you could be wasting money by not doing so. The best way to make sure your Hayward pool filter is operating efficiently is to have it cleaned and serviced at least twice a year.
How to back flush Hayward filter?
The best way to back flush a Hayward filter is to use the Hayward AquaForce unit that you installed. It’s designed to make quick work of clearing a clogged filter in the easiest and most efficient way. For more on how to use the Hayward AquaForce back flush unit, check out this video. If it’s been a while since you’ve cleared your filter, it’s possible that your filter cartridge is clogged with algae and other debris. A Hayward
How to back flush a Hayward pool filter cartridge?
After the filter cartridge is back flushed, check to see if the water level is lower than the filter cartridge. You can do this by standing on a chair and looking down into the filter housing or by placing a stick down into the filter hopper and checking to see if the water is above the filter cartridge. If the water level is lower than the filter cartridge, you need to back flush the cartridge again.
Hayward pool filter back flush?
If you have a Hayward filter in your pool, you’ll want to back flush it once or twice a year. Back flushing is the process of pumping in clean water while the filter is running. You can do a back flush by turning the filter on, filling the pool to the appropriate level (usually 2-3 inches above the filter), and then slowly pumping the water into the system until the water level is below the filter. The filter will automatically shut off once the water level is
Back flush a Hayward pool filter cover?
The Hayward filter covers are designed to be sealed tightly against the filter to help prevent debris from entering and clogging the filter. If the filter cover is not sealed tightly, you may be able to back flush the filter using a bucket of water. However, be careful not to break the seal by hitting the cover or the filter itself with the bucket. If the filter cover is cracked or damaged in any way, you should not back flush it. The filter cover should be replaced as soon as possible to
