How to backwash a cartridge pool filter?
To do a backwash, simply fill the cartridge with water until it’s about a quarter full, then turn the filter on its side and let it drain into a bucket or sink. Once the filter is drained, turn it back over and slowly raise the water level in the cartridge to about half full. Let the filter run for 20 seconds or so before turning it off. Replace the filter cartridge when it’s completely dry.
How to backwash a cartridge pool filter manually?
The most efficient way to backwash a cartridge filter is to use a cartridge backwash tool. This is a great way to get the best clean out of your filter cartridge, and it’s also easy to do. You don’t need experience to use a cartridge backwash tool; it’s as simple as screwing it onto the end of your cartridge filter. Most cartridge backwash tools come with detailed instructions, including how to determine if you have a clean filter cartridge.
How to backwash a cartridge pool filter all at once?
If you’re able to backwash your cartridge filter from inside the filter housing, you can do a complete backwash. You can accomplish this by filling the cartridge with water and turning the filter on. Let it run for five minutes and then turn it off and let it drain. This method will usually dislodge anything that may have been caught in the filter.
How to backwash a cartridge pool filter on the regular?
To backwash a cartridge filter, turn the filter on and let it run until it stops. While the filter is running, fill the clean water tank to the proper level using a clean bucket. Then, slowly pour the water into the filter until it reaches the fill line. Once the filter is full, turn it off. Let the filter sit for a few minutes, allowing the filter to pressurize and expel any debris that may have collected in the cartridge during use. Finally, turn the filter
How to backwash cartridge pool filter?
You can either turn on the filter by opening the drain and allowing water to flow until the filter is completely clear of debris, or you can run the filter in reverse. There are pros and cons to doing the backwash in both ways. Running the filter in reverse creates less pressure on the filter cartridge, which can lead to a longer life. Running the filter in the forward position extends the amount of time it takes to clean the filter.
