How to backwash a Hayward de filter above ground pool?
To backwash a Hayward filter above ground pool, turn on the filter (if it has a switch, flip it on), put the filter basket in the pool, and pump water into the filter from the skimmer until the water level rises about one to two inches above the filter. Once the filter is full, press the backwash button, holding it down for about 15 seconds. You’ll know the filter is backwashed when the filter screen becomes clear and the water flows out of the
How to backwash a Hayward de filter on a cover?
The Hayward De filter is a cover-mounted filter that’s installed on top of a Hayward Plumber P-trap. These self-contained filters make water disposal quick and easy while keeping the water and air in the upper portion of your pool.
How to backwash a Hayward de filter above ground pool cover?
When you need to backwash your Hayward de filter, it’s a good idea to have a cover in place. If you don’t have a cover, the water will be sprayed all over the surrounding area. If you have a Hayward filter, it’s preferable to backwash the filter from underneath the cover. Push down on the filter, slowly, while raising the filter from underneath. If you are unable to do this, you can also backwash the filter from the
How to backwash a Hayward de filter cover?
When you need to backwash a Hayward de filter, the first thing you need to do is remove the filter cover. Once you have done that, use a garden hose to direct water into the filter. Make sure to direct the water at an angle so that it doesn’t go down into the filter cartridge or the pump. Then, slowly pour the water into the filter and let it drain. When the water level is back to the same level as before you began, you can put the
How to backwash a Hayward de filter cover pole?
When you turn on the filter pump, the filter cover pole will rise, lifting the filter over the water surface. The filter cover is automatically lifted high enough to allow water to flow freely through the filter cartridge. When the filter is full and the filter cover is automatically lifted, you can backwash the filter above ground. If you want to backwash the filter cover only, press the button to lift the cover manually. If you press down on the filter cover when it is up, you will turn
