How to backwash a Hayward pool filter video?

The Hayward PureForce PowerFlo FX3 filter is designed to run on less than 5 gallons of water per hour, so it’s important to backwash it regularly. We recommend doing a filter backwash every two weeks. The filter can be backwashed using the Hayward PowerFlo FX3 backwash system, which is the most efficient and gentle way to do it. The filter will spin inside the housing, and water will be drawn into the filter cartridge and sent back out. The filter can

How to backwash a Hayward pool filter cover?

If you have a Hayward filter, a Hayward filter cover is most likely installed over it. You can backwash your filter and filter cover separately or together. If you have a Hayward filter and a Hayward filter cover, you can do a filter backwash on your filter alone or with your filter cover. If you have a Hayward filter and a Hayward filter basket, you can do a filter backwash on your filter alone or with your filter basket. If you have a Hayward filter and a Hayward filter cartridge

How to backwash a Hayward pool filter cover with a hose?

Once backwashing has been completed, turn the filter off and let the filter cover drain by itself. Then, turn on your filter pump. Let the water run for about 15 seconds to clear the filter of any gunky water that collected while backwashing. Now, secure the filter cover and slowly turn the filter back on. You should hear a slight gurgling sound as the filter cleans the water.

How to backwash Hayward pool filter cover?

We recommend you backwash the Hayward pool filter cover every two weeks in your routine pool cleaning. To do this, simply remove the Hayward filter cover, then turn on the pump and water. Leave the filter on, pointing up. Let the water flow through the filter for about five minutes, then turn the filter off. Leave the filter on without the filter cover on for another 15 minutes. Finally, turn the filter off and remove the filter cover to collect the water that was filtered.

How to backwash a Hayward pool filter cover with water?

Now that you have drained the filter, you will want to add water back into the pool. The key is to not overfill the pool. A Hayward pool filter cover acts as a barrier between the pool and the filter to keep water from entering the pool once the filter is drained. Instead of adding water to the pool, you will want to slowly add water to the filter and allow the filter to backwash. You don’t want to dump the water into the pool. Doing so would