How to backwash a Hayward pool pump?

First, skim the surface and collect the water in a bucket. Disconnect the hose and drain the water from the pool. Turn the pump off. After you have drained the water, you can perform a backwash of the Hayward pool pump. Connect the hose and slowly push the water down towards the impeller. Once the water is in the proper position, you can slowly turn the pump on and allow the water to flow. Repeat this process for about 20 minutes for a highly effective backwash of

How to backwash a Hayward pool pump filter?

The Hayward Pump Filter has two filter cartridges, one on either end. To backwash the filter, you need to remove the cartridges and drain the water from the pump. Screw the filter out of the pump, remove the hose, and drain the water. To do this, you'll need an Allen wrench or similar tool and a screwdriver. Tighten the Allen wrench securely so you can turn the screwdriver. This will allow you to remove the filter from the pump. When you have removed the

How to clean a Hayward pool pump filter?

If the filter cake has hardened onto the filter cartridge, you can scrape it off with a plastic or metal tool. If you don’t have a tool handy, you can do it manually by soaking a piece of plastic tubing with water, pushing it down into the filter cartridge and rocking it back and forth to dislodge the gunk. Just be careful not to damage the filter cartridge, as this could lead to water leaks.

How to clean Hayward pool pump?

First, disconnect the power supply to the pump. Then, loosen the hose clamp that holds the return line to the pump. If you have a Hayward pump with a ball lock nut, use a wrench to loosen it. If you have a Hayward pump with a screw lock, remove the lock by carefully twisting the lock counter-clockwise. Carefully pull the hose away from the pump until you feel the weight is lifted. Now, pull the hose away from the pump body.

How to clean a Hayward pool pump filter bag?

Begin by turning on your Hayward filter pump and wait until the filter makes several cycles. Once the filter runs for about five minutes, you can begin to use a Hayward bagless filter vacuum to pull water through the filter. After the vacuuming, simply pull the bag out and throw it away. If you have a filter screen, you will want to run the pump until it runs dry before changing the bag.