How to backwash above ground pool cartridge filter?

After you’ve removed the cartridge filter from the pump, you can backwash it. To do this, turn the water supply to the cartridge off. Then, slowly begin pumping water through the cartridge backward, turning the cartridge a few times. Once the filter is clear of debris, you can turn the water supply back on and repeat until you’ve gone through the entire filter.

How to backwash above ground pool cartridge filter in power washer?

Using a power washer is one of the most accessible and affordable ways to clean your cartridge filter. With a power washer, you can force a high volume of water through your cartridge filter (depending on the power of your machine), dislodging debris and gunk from the filter.

How to backwash above ground pool cartridge filter with power washer?

To backwash the cartridge filter, use a power washer. Turn on the machine and aim it toward the cartridge in the filter. Turn the water pressure up to a high stream and let the water flow for 30 seconds. Then, turn the machine off. If the filter cartridge is full, you may need to repeat the process a few times.

How to backwash above ground pool cartridge filter without power washer?

If you don’t have access to a power washer, you can manually backwash your cartridge filter by using a bucket and a garden hose. Turn on the hose and attach it to one of the outlets of your cartridge filter. Now pour some water into the bucket and slowly release the water into the cartridge filter. Do this continuously until the water flows without clogging. You can also backwash your cartridge filter using a hand-crank or power vacuum cleaner. These are the easiest ways

How to backwash above ground pool

When it comes to backwashing an above ground pool filter cartridge, there are a few different techniques to choose from. The most common method is the bucket method. This involves placing a bucket under the cartridge and slowly pouring water down the cartridge. Don’t fill the bucket more than halfway because too much water will cause the cartridge to break. If you’re unsure if you’ve filled the cartridge too much, test it by dropping a few drops of water onto the filter. If