How to backwash Hayward pool system?
While backwashing the Hayward system you don’t want to spin the basket. Instead, use a hand-held hose and slowly shower the tank’s drain. If your pool is heavily filtered, you can spin the basket a little bit, but don’t spin it so fast that it will pick up a lot of sand and other debris into the filter. Always backwash your filter before taking a dip!
How to backwash Hayward pool system cover mesh?
To prevent the water from passing through the pool cover mesh when backwashing, raise the pool cover or flip it over so that the water flow is away from it. If you have a Hayward pool with a tarp above the filter, remove the tarp to allow air flow.
How to backwash Hayward swim spa?
Before performing a backwash session on your Hayward spa, fill it up with water. This will allow the filter to work properly and help to remove any debris that may have collected during normal use. After the water is up to the proper level, add some biograss or sand to the filter. This will help to clean out any gunk that may have collected as well as make it easier for your filter to do its job. Now, you can run a backwash by running the filter
How to backwash Hayward swim spa cover mesh?
The Hayward cover is essential to keeping water in the pool and out of the spa. It’s a large filter that protects the pool water from dirt, sand, leaves, and other debris that may enter the system. The mesh is designed to prevent larger items from entering the water. Over time it can develop a buildup that creates a small odor. To refresh the filter, start by emptying and disassembling the cover. Then, fill it with water and let it sit for a few
How to backwash Hayward pool system cover?
The Hayward pool system cover helps keep water in your pool and cuts down on evaporation and airborne contaminants. It also helps keep your pool water clean by filtering out particles that may end up in it. To backwash your pool cover, first, turn on the motor and slowly pull it back toward the pool. The cover should pull out of the pool and slowly move into a position where it’s parallel with the pool’s edges. Once it’s in place, turn
