How to drain pool cover with garden hose?

Most pool covers are fitted with a gutter, either along the sides or on the corners. If yours does, you can turn the garden hose into a makeshift pool cover drain by directing the water into the gutter. This works best if the gutter is deep enough. If it’s not, try draining the cover into the drain that feeds your pool filter.

How to drain pool cover with a water hose?

The steps are pretty simple. First, turn the faucet on as high as it can go, and direct the stream of water onto the pool cover. The pool cover will start to slowly move down into the pool. As the pool cover gets closer to the pool, turn the water down to a lower setting to allow it to slowly submerge. Perform this process until you have removed all of the water.

How to remove pool cover with garden hose?

If you have a vinyl pool cover, you can use a garden hose to pull it up. First, turn on the hose faucet and place the hose over the pool cover. Turn the pool cover over so the water is on the underside. Slowly pull the pool cover up and away from the pool. If the water is pulled up the entire length of the cover, stop the pull. If not, keep pulling the cover up until it is about two feet from the pool. This allows the

How to remove pool cover with a garden hose cover?

First, make sure the hose is long enough to cover the pool. Then, turn on the hose and let it run. You may need to turn down the water pressure to get the cover off, especially if it’s on a large pool. It might also help to have someone at the poolside to help guide the hose while it’s draining.

How to remove pool cover with a garden hose?

The first thing you need to do is turn off your pool pump. If your pool is covered with a tarp, remove it. If you have a filter system fitted to your pool, turn it off too. If you have a drain cover fitted, remove it by placing a hose over the drain and pulling it up. If you don’t have a drain cover fitted, you will need to use a garden hose to remove the water from your pool.