How to reset Honeywell thermostat rth230b?
The reset button is located on the thermostat’s face. It is usually located at the bottom right corner of the thermostat. You will press the reset button for about 30 seconds to reset the thermostat. It will beep when the thermostat is reset.
How to reset my Honeywell thermostat rth?
If the power light on the thermostat is flashing or not working, or the thermostat is not responding at all, it is likely due to a bad connection. You may need to replace the outdoor wiring if the problem persists. If the thermostat is not working, you can press and hold the power button for about 20 seconds. This will reset the unit back to the default settings.
How to reset my Honeywell rth?
You can reset the thermostat’s settings by pressing the menu button while pressing the on/off button at the same time. To power off the thermostat, press the off button and wait for the green LED to stop flashing. To change the thermostat’s temperature settings, press the menu button while pressing the on/off button at the same time. Choose the temperature setting you want to use and press the on/off button again.
How to reset Honeywell thermostat rth
Before you begin the procedure, be sure to turn the power to the thermostat off. You will need to do this regardless of whether the display is showing an error or not. After doing so, press and hold down the reset button on the thermostat for about 10 seconds. It will begin to flash blue and then turn off. If you see the “Ready” message on the display, it means the reset was successful.
Reset Honeywell rth?
The first thing that you can do is to press the reset button. If the problem still persists, try unplugging the remote control. Sometimes the problem is caused by a loose connection. If it still does not work, try to replace the batteries. You can also try to set up the default time and temperature.
