How to use sea foam before oil change?

You can use the natural detergent in the sea foam to clean the engine block of any residue left over from the previous oil change. Keep in mind that the detergent alone is not enough to restore the cleanliness of the engine block. You need to use the right detergent and use a clean towel or paper towels to scrub the engine. Use the detergent liberally, as a little goes a long way. After the scrubbing is done, wipe off the engine block with a cloth and

How to use seasfoam before an oil change?

To use this method, you will mix the special brew of tea tree oil and natural sea minerals with some water and apply it to the engine block and oil filter. Leave the mixture on for 15 minutes, and then drain the oil and do your oil change as usual. The engine’s metal parts will be protected from corrosion, and the oil will have a fresh scent.

How to use high concentration seasfoam before oil change?

Add a few drops of 10-30% seasoap into your oil drain. The more you add, the better. You don’t want to add too much — you don’t want to overflow your oil drain or foam up your oil. After you add the oil, wait for about 10 minutes and drain your oil. Any residual oil left in your drain will be cleaned off by the foam. If you don’t have access to seasoap, you can use

How to use seasfoam before a car oil change?

To use ‘seasfoam’ as an oil change protection and supplement, add two or three tablespoons of the foam into the oil before you put it in the engine. Depending on what kind of oil you are using, you may want to add a little bit more. There’s no set amount because each oil brand has a different consistency. After you add the foam to the oil, put the oil in your car and shake it up to help the foam get mixed into the

How to use seasfoam before oil change?

It is important to use this special detergent for your car’s oil change in the right amount. Add a few drops to the oil on the drain screen. Use a funnel to make sure you get the oil. Then add the appropriate amount of water so the mixture reaches the level of the oil. Pour the detergent into the oil and let it sit for 30 minutes. If you want, you can add more detergent after the first 30 minutes. Once the oil is clean, drain