How to use sea foam engine treatment?

Add it to the engine oil. If you use a synthetic blend oil, add 1-2 drops of the foam to the oil every time you change the oil. Using a quality oil will help the engine run smoothly and reduce the risk of corrosion and breakdowns. You can also add the foam to the oil after it cools down.

How to use water and sea foam engine treatment?

Water is an effective way to clean engines. However, water alone is not enough to remove the dirt, grime, and maintenance buildup that can cause engine damage. To get the best results, use water mixed with a chemical-based product called “sea foam.” Just a few minutes of regular washing will remove any loose dirt and grease and prevent it from coming back. To accomplish this, put a bucket of water and some sea foam in it and fill your engine with the mixture.

How to use sea foam engine treatment UK?

You can either use the foam granules inside the engine or the liquid version. Once the engine is running, turn it on for 30 seconds and then turn it off. The foam will penetrate the engine and protect it from corrosion by “sealing” it.

How to get out of sea foam engine treatment?

EFT is a permanent treatment, so you don’t want to attempt to wash it off. You will need to clean the engine and any other affected areas with a good detergent and water and leave them to dry properly. Always wear gloves and protective eyewear when cleaning up any spilled chemicals. Be careful not to expose yourself or anyone else to the detergent and engine oil.

How to use water and sea foam engine treatment UK?

The antifouling properties of the sea foam engine treatment will last for up to 5 years. You should clean your boat once a year using the foam. Make sure your boat is completely dry before applying the foam. Apply the foam on the surfaces you want to clean. Leave the coating on for 30 minutes before completely rinsing it off with fresh water.